Mixer Application Questionnaire
Name: *
Title:
Company: *
Company Address: *
 
City: *
State: Zip/Postal Code:
Country: *
Phone: *
Fax:
Email: *
Company Web Site:
 

* Required fields



The following data is useful for properly sizing equipment and establishing process parameters to accomplish a desired separation. All data is treated confidentially.


PROCESS
Process Name:  
 
Process Description
 
Total Vessel Volume:   Gallons Liters

Pope supplied tank
Customer supplied tank

 
 
Normal
Minimum
Maximum
    
Liquid Volume gal Liters
Temperature °F °C
Pressure psig kPa
 
OPERATION
Mixing Time:    Minutes Seconds
 
Mixing Processes (Check all that apply)
Liquids Liquid & Solids Liquid & Gas
Miscible liquid blending Complete suspension Gas dispersion
Maintain uniformity Uniform suspension Gas absorption
Immiscible liquid dispersion Dissolving Gas stripping
Emulsification Dry solids incorporation Steam heating
Heat transfer Washing or leaching  
Chemical reaction    
 
Liquid Components
Weight
Sp. Gr.
Viscosity
Shear Behavior
1.
2.
3.
 
Solids
Weight %
Sp. Gr.
Settling Rate
Size Range
 
Solids Added:
Wet
Dry
Solids Characteristics:
Soluble
Insoluble
Abrasive
 
Fluffy
Floating
Sticky/Gummy
 
Gas
Flow Rate
Pressure
Temperature
 
Product
Sp. Gr.
Viscosity
Shear Behavior (Non-Newtonian)
 
Is process performed at present or is development information available?  Yes  No
 

Provide a description of the present or development situation, including batch size,
tank dimensions, impeller diameter, rotational speed, mixer mounting, etc.

 
Is performance satisfactory?  Yes  No
If not, please explain:
 
EQUIPMENT
Shafts and Impellers
Material
 316L Stainless Steel Hastelloy C-276 Other:
Shaft
 1 Piece "Pool Cue" 2 piece shaft
Impeller
 Marine Prop (std.) Other:
Setscrew Mounting (std.) Impeller welded to the shaft
 
Seal Specifications
Single Dry Mechanical Seal (std.) Special:

Carbon Primary Ring (std.)

 Special:

Tungsten Carbide Mating Ring (std.)

 Special:

Viton Elastomers (std.)

 Special:

316 Stainless Steel Hardware (std.)

 Special:
 
Utilities Available
Electric
Voltage
 115 230 Other: 
Phase
 Single Three
Frequency
 60 Hz 50 Hz
Explosion Proof Div. 1
Class Class I - Vapors Class II - Dust Class III - Fibers
Group Group D Group C & D Other
Air  PSIG
 
Mixer Mount
Angle - Offset Mount Center Mount
Baffles
150 lb. ANSI Flange Sanitary Other
Flange Size:
 
Other
Bayonet motor mount for autoclave service, etc.
Tachometer